Masimo SafetyNet Alert™
Daily Monitoring
Daily Monitoring
Changing the Sensor and Adhesive Tape
The kit contains two disposable sensors, each of which is intended for up to 96 hours in typical continuous usage. The kit also contains 12 extra adhesive tapes, which should be replaced if they get dirty or if the adhesive is no longer sticking.
When inserted into a sensor, the indicator light on the chip will show you if the sensor needs to be replaced:
Orange light
Sensor battery is low. Consider changing your sensor.
Red light*
Sensor battery has no more power: You should replace the sensor.
Masimo SafetyNet Alert Basics
The chip is reusable. Do not throw it away when changing sensors.
Changing the Replacement Tape
1. Remove used tape from sensor
2. Attach new tape in same direction as used tape
3. Attach sensor to finger
4. Peel the remaining tape off backing and continue applying sensor per the instructions
References
- *
Red light can also refer to a sensor or chip problem – refer to FAQs for the meaning of all chip light colors and recommended actions.
Masimo SafetyNet Alert has obtained CE Marking. Not available in all markets. Check with your sales rep or customer service for product availability.
PLCO-004853/PLM-13023A-0721